Innovative Lösung für Lifttrassen in Skigebieten
Die Lifttrax Gleitmatten bieten eine innovative Lösung für Skigebiete, insbesondere für solche mit Schleppliften unterhalb von ca. 1000 Metern, die häufig mit Schneemangel zu kämpfen haben. Diese Matten sind darauf ausgelegt, den Skibetrieb auch bei ungünstigen Schneeverhältnissen aufrechtzuerhalten und bieten zahlreiche Vorteile für verschiedene Anwendungen im Skigebiet.
Problematik bei Schneemangel
Viele Skigebiete mussten den Liftbetrieb aufgrund von Schneemangel einstellen, obwohl auf den beschneiten Seiten des Lifts noch genug Schnee zum Skifahren vorhanden war. Der Schnee in der Liftspur war jedoch geschmolzen, was den Betrieb unmöglich machte. Clevere Skigebiete haben dieses Problem gelöst, indem sie vor dem ersten Schneefall die Liftspur mit Lifttrax SP Gleitmatten ausgelegt haben. Diese Matten werden auf einem Vlies verlegt und mit Erdnägeln am Boden befestigt. Im Frühjahr können sie schnell abgebaut und auf Paletten verstaut werden.
Vorteile der Lifttrax SP Gleitmatten
Die
Lifttrax SP Gleitmatten
(aus HDPE Kunststoff) halten den Schnee in der Liftspur signifikant zusammen und sorgen dafür, dass er viel langsamer schmilzt. Selbst bei Schneeschmelze durch hohe Temperaturen können Skifahrer und Snowboarder auf den Matten weiter zum Liftausstieg gelangen. Das Beispiel des Skigebiets Ebenalb in der Schweiz zeigt, dass ohne die Gleitmatten der Skibetrieb schon seit Wochen nicht mehr möglich wäre. Dank der Matten können sogar Skirennen an den Wochenenden durchgeführt werden, während andere Skigebiete bereits das Saisonende verkünden mussten.
Flexibilität und Installation
Die Lifttrax Matten bieten mit der Größe von 22x22 cm die optimale Flexibilität am Hang. Je nach Wunsch kann die Breite der Spur verlegt werden: 110 cm, 132 cm, 154 cm, 176 cm oder 198 cm. Die Lifttrax Matten sind zusammensteckbar und somit nach Bedarf vor Ort installierbar. Darüber hinaus kann auch nachträglich (für die nächste Saison) die Liftspur mit Matten erweitert werden, indem an der Seite weitere Matten installiert werden.
Optimale Breite für verschiedene Liftarten:
Eine Mattenbreite von ca. 134 cm ist für einen Einpersonen-Schlepplift optimal. Für einen Ankerlift für zwei Personen sollten die Matten breiter ausgelegt sein, insbesondere wenn viele Snowboarder den Lift nutzen. Die meisten Schlepplifte sind zwischen 100 und 800 Meter lang, und diese Liftspurlösung kann die Betriebszeiten bei hohen Temperaturen sichern. Aufgrund der geringen Geschwindigkeit des Rutschens der Ski und Boards auf den Matten ist der Verschleiß der Matten sehr gering. Bei guter Säuberung und optimaler Lagerung auf Paletten kann eine Nutzungsdauer von bis zu 20 Jahren erreicht werden, was die Investition in das Lifttrax SP Mattensystem produktiv macht.
Praktische Handhabung und Lagerung
Praktisch ist es, wenn die Matten zu Flächen zusammengesteckt werden, z.B. 1,76 m x 2,00 m, und so nacheinander in die Liftspur verbaut werden. Nach der Wintersaison können dann die Mattenflächen auf entsprechende Paletten gelegt und eingelagert werden. Im Herbst lassen sich diese Mattenflächen schnell wieder in die Liftspur legen.
Innovative solution for lift routes in ski resorts
The Lifttrax glide mats offer an innovative solution for ski resorts, especially those with T-bar lifts below approx. 1000 metres, which often have to contend with a lack of snow. These mats are designed to maintain ski operations even in unfavourable snow conditions and offer numerous advantages for various applications in the ski area.
Problems with a lack of snow
Many ski resorts have had to shut down lift operations due to a lack of snow, even though there was still enough snow to ski on the snow-covered sides of the lift. However, the snow in the lift track had melted, making operation impossible. Clever ski resorts have solved this problem by covering the lift track with Lifttrax SP sliding mats before the first snowfall. These mats are laid on a fleece and fixed to the ground with pegs. In spring, they can be quickly dismantled and stored on pallets.
Advantages of the sliding mats
The Lifttrax SP glide mats (made of HDPE plastic) significantly hold the snow together in the lift track and ensure that it melts much more slowly. Even when the snow melts due to high temperatures, skiers and snowboarders can still reach the lift exit on the mats. The example of the Ebenalb ski resort in Switzerland shows that without the sliding mats, skiing would not have been possible for weeks. Thanks to the mats, ski races can even be held at weekends, while other ski resorts have already had to announce the end of the season.
Flexibility and installation
With a size of 22x22 cm, the Lifttrax mats offer optimum flexibility on the slope. The width of the track can be laid as required: 110 cm, 132 cm, 154 cm, 176 cm or 198 cm. The Lifttrax mats can be plugged together and therefore installed on site as required. In addition, the lift track can also be extended with mats at a later date (for the next season) by installing additional mats on the side.
Optimum width for different types of lift
A mat width of approx. 134 cm is ideal for a one-person drag lift. For an anchor lift for two people, the mats should be wider, especially if many snowboarders use the lift. Most surface lifts are between 100 and 800 metres long, and this lift track solution can ensure operating times in high temperatures. Due to the low speed of the skis and boards sliding on the mats, the wear on the mats is very low. With good cleaning and optimum storage on pallets, a service life of up to 20 years can be achieved, making the investment in the Lifttrax SP mat system a productive one.
Practical handling and storage
It is practical if the mats are put together to form areas, e.g. 1.76 m x 2.00 m, and installed one after the other in the lift track. After the winter season, the mats can then be placed on pallets and stored. In autumn, these mat surfaces can be quickly placed back in the lift track.
UPDATE - Berichte von anderen Installationen